TIP TIG, Titanium welding made simple. The ability of a weld process can be judged in the weld results attained with complex alloys, and there is no alloy more complex than Titanium.
When welding any alloys, and especially titanium welding with the manual TIG or the automated Hot Wire TIG process, there is always concern about the weld oxidation. Weld shops evaluate the
finished titanium weld quality by the untouched color of the completed weld. A silver color with an untouched titanium weld is the first choice. Regular manual TiG welds on Titanium parts >3
mm are carried out at typical TIG weld speeds in the 2 to 5 inch/min range. The slow TIG weld speeds will create high temperatures and the solidified weld that trails the gas cup may be at
temperatures that exceeds 700F. Once above this temperature the titanium, welds can result in oxidation reactions with the atmosphere. Those reactions will ruin the titanium properties creating
To protect the titanium welding, for decades welders have had to use extra-large shielding nozzles and a cumbersome, argon trailing shield attached to their TIG or MIG torches and to the back
side of the welds. With single pass, titanium TIP TIG welds made on parts over 4 mm, the weld heat measured within 3 mm of a fillet weld edge immediately at the weld completion is
typically in the range of 300 to 380F. This temperature range is too low for weld oxidation to occur with any alloys. When you can produce the highest weld quality with the lowest
weld heat with any alloy welds, you not only produce the cleanest welds with the lowest weld pore content, you eliminate weld cracks, weld distortion, weld stress issues, and you should enable
the highest possible weld – clad metallurgical properties and you will be pleased to know that with the TIP TIG process, most manual or automated titanium welds will typically be done 100% to
300% faster and the biggest impact on weld heat is weld speed.
The reason TIP TIG is the world’s best process for titanium welding is with most single pass welds the titanium temperature within 3 mm of the weld edge is typically 280F – 380F.
TIP TIG titanium welds to produce much lower weld heat resulting in untouched, 100% silver welds. The weld agitation also enables the lowest titanium weld porosity content.